Karakteristik
△Supports 9.95Gb / s 11.3Gb / s ti jan pousantaj
△Up 80km sou 9 / 125μm SMF
△Support Digital Digital Siveyans kone siveyans
△Hot-ploge XFP anprint
△ Referans Clock Referans obligatwa
△Metal ki femen, pou pi ba EMI
△Supports liy-bo ak XFI loopback
△ Creole lage mekanism lage
△Power disipasyon<>
△Case opere tanperati
Komesyal: 0 ~ + 70oC
Enfomasyon sou Komandman Pati
Nimewo Pati | Done Pousantaj (Gb / s) | Longe vag (nm) | Transmisyon Distans (m) | Tanperati (oC) (Opere Ka) |
HTXF-DT96-80C | 10.3125 | Gade nan seleksyon vag | SMF 80km | 0 ~ 70 komesyal |
Kondisyon opere ak kondisyon ekipman pou pouvwa
Paramet | Senbol | min | Tipik | Maks | Inite | Not |
Opere Tanperati Ka | TOP | 0 | 70 | oC | Komesyal | |
Pwovisyon voltaj | vCC | 3.135 | 3.465 | v | ||
Prensipal voltaj ekipman pou | Vcc5 | 4.75 | 5.25 | v | ||
Done pousantaj | 10.3125 | Gb / s | ||||
Kontwol Antre voltaj segonde | 2 | Vcc | v | |||
Kontwol Opinyon voltaj Low | 0 | 0.8 | v | |||
Distans link (SMF) | D | 80 | kim | 9/125um |
Jeneral Deskripsyon
HTF-DTF-DT96-80x disparab transsiver se yon transsever fibre optiic entegre ki bay yon lyen segonde-vites seri nan pousantaj siyal soti nan 9.95 Gb / s 11.35 Gb / s. Modil la konfome ak 10 Gigabit ti fom fakte plugable (XFP) ako miltisource-MSA (INF-8077i) ak Tunable XFP pou ITU Frekans Grid Aplikasyon pou Grid (SFF-8477).
Li konfome ak ITU-T G.698.1 estanda ak 50 GHz chanel espas pou SONET / SDH, IEE DWDM 10GBASE-ZR pou 80 km rive (Ethernet), ak DWDM 10GFC pou 80 km rive (Fib Chen) aplikasyon pou.
Transceiver a entegre chemen destinye a ak transmet sou yon sel modil. Sou bo transmet la, se 10 Gbps done seri done refe, retimed, ak pase nan yon chofe modilate. Modilate chofe yo ak modilasyon yon C-red-red entegre laze Mach-Zehnder (ILMZ), pemet transmisyon done sou fib sel-mod nan yon konekte endistri-estanda LC. Sou bo destinataire a, se 10 Gbps done rivye a refe soti nan yon anplifye APD / trans-impedance, retimed, ak pase nan yon chofe pwodiksyon. Modil sa a karakteristik yon cho-ploge XFI-konfome kwiv elektrik.
Karakteristik optik
Karakteristik sa yo optik yo defini sou Anviwonman an Operating rekomande sof si otreman espesifye.
Paramet | Senbol | Min. | Tipik | Maks | Inite | Not |
transmete | ||||||
Optik longe | λc | λc -0.05 | λc +0.05 | nm | 1 | |
Sant vag espas | 50 | Gaz | ||||
Optik Laje Spectral | ∆λ | 1 | nm | |||
Side Mode Rapo Sipresyon | SMSR | 30 | dB | |||
Mwayen optik pouvwa | Pavg | -1 | 4 | dbm | 2 | |
Optik Rapo Disparet | ER | 9 | dB | |||
Transmete ak dispesyon penalite | TDP | 3 | dB | |||
Transmete kouran ki soti nan pwodiksyon | pwaf | -30 | dbm | |||
Estabilite frekans (BOL) | -1.5 | 1.5 | Gaz | |||
Estabilite frekans (EOL) | -2.5 | 2.5 | Gaz | |||
Transmete je Mask | Konfome avek IEEE802.3ae | |||||
Destiray | ||||||
Sant Lanvegasyon | λC | 1270 | 1610 | nm | ||
Resevwa Sansiblite (pouvwa mwayen) | Sen. | -24 | dbm | 3 | ||
Opinyon Pouvwa Satire (overload) | Aparey pou boule | -7 | dbm | |||
Pedi asosye | PEDI | -37 | dB | |||
PEDI De-assert | PEDI | -27 | dbm | |||
Los Hysteres | PEDI | 0.5 | dbm | |||
not:
1. λc a seleksyon vag, ak koresponn ak apepre 0.4 nm
2. Klas 1 Laze Sekirite pou chak FDA / CDRH ak IEC-825-1 regleman.
3. Mezire ak sous limye 1528.77 ~ 1563.86nm, ER = 6.0dB; BER =<10^-12 @10.3125gbps,="" prbs="2^31-1">
Dimansyon mekanik
Baj popilè: modil dwdm xfp xfp, Lachin, manifaktire, founise, faktori, Customized, achte, pri, esansyel, mak konpatib
